6 String Acoustic Guitar Bridge Saddle & Nut

This guitar saddle and nut is good for replacing your old or broken saddle nut for your Acoustic guitar, which to get good sound of your guitar in terms of tone and brightness. 

Features:

• Fit for Acoustic Guitar
• Color: Beige White
• nut size: 42 x 6 x 9mm
• saddle size:73 x 3 x 9mm

How to install Saddle & Nut?

• Start by removing the strings and bridge pins. you could also use a simple string winder to complete this task. After removing your strings, the saddle should just come out of the slot without any trouble. If it does get stuck, take out gently
• The next step is seeing how the saddle blank fits into the bridge slot. If you find yours isn’t fitting, you don’t want to force it in. You may get ready to do minor cutting or take a piece of sandpaper, put it on a flat surface, and use that to get the right thickness. Sands the saddle evenly on both sides until she finds the right fit. 
• You now need to make sure the length fits properly as well. If it’s too long, you can cut or sand the sides, making sure you’re doing so at a 90 degree angle, and rounding it over a little bit.
• Next is to get the proper height for the saddle. Take the old saddle as reference. Lay it across the top of the new saddle. Sand saddle to height. This is important because you want more contact at the bottom of your saddle with the bottom of the saddle slot. 
• The final step of installing a new acoustic saddle is checking the string height. You may want to use a fritz ruler or ordinary ruler for this task. Once it is in right measurement, your guitar is now ready to go

Package Content:

• 1 x nut
• 1 x saddle
• Optional Item : 1 x Small piece of Sandpaper (9cm x 10cm)

(Note : Photo attached is for reference only, it may be slightly varied in items of colour, shape from the actual item delivered from time to time

Note 2 : This model is for Acoustic, if you are looking for saddle nut for Classical guitar or electrical guitar or Ukulele, please ask us)